GENERGY CUBE Serie Instrucciones De Uso página 60

3 Turn the key ignition switch to "ON" and then to "START", release once the
engine has started.
NOTE: IF the engine does not start up within 3 or 4 seconds, release the key
ignition and wait for a few seconds before trying again to avoid overheating the
ignition switch.
4Once started, change slowly the choke lever completely to open air position. The
engine will begin working stably and is ready to have equipment plugged in.
In the GUARDIAN SC6 and GUARDIAN FR6 models is not necessary make this
step due the choke work automatically.
.
ONLY IN GORBEA-
ESTRELA-MONCAYO-
ANETO-MULHACEN
NOTE: Do not leave the choke in an intermediate position, the blend would
be too rich and the engine would not work properly.
During the first startup of the machine the battery's charge may be low if stored for
too long. If the charge is not sufficient, start up the equipment manually. The
battery is recharged automatically while the generator is running.
MODELS
57