BINAR NEO 30 Instrucciones De Instalación página 18

• The lifting device contains many safety critical and ESD sensitive components and for
this reason anyone performing maintenance must possess the requisite knowledge.
Safety functions – lifting device
• Anti-drop brake – The lifting device has integrated an anti-drop brake. In the event of
a low battery voltage the load will not fall but is held safely in place. All functionality
returns once the battery is charged or replaced.
• The lifting device stops as soon as the operator releases the manoeuvre handle.
• The lifting device has an overheating protection for the motor.
• Every battery has an overheating protection.
Installation
If the installation takes place at height, ensure appropriate precautions are taken. Work
platform is recommended.
Maintenance
If the maintenance takes place at height, ensure appropriate precautions are taken.
Work platform is recommended.
Replacement of rope
During replacement of the rope, the lifting device must be mounted down and the rope
replacement shall be done on a workbench, see the procedure in Part III.
The normal life limit for the rope is approximately 40,000 to 60,000 cycles. However, it is
always the condition of the rope that determines when it should be replaced.
General description
The manoeuvre handle detects the force from the hand and converts the signal to a lift-
ing speed.
When the grip on the manoeuvre handle is released, the lifting device stops its vertical
motion. The horizontal movement does not slow down.
Other functions
• Tilt check, the lifting device stops the rope ejection when the lifting device tilts more
than approximately 45° to minimize the risk for rope tangle.
• Overheating protection:
1. The lifting motor is warm, this is indicated with a red continuous light and one
beep. Reduce the frequency of the number of lifts and/or lower the ambient
temperature.
2. The lifting motor is overheated, this is this is indicated by a red flashing light and
two beeps. Let the lifting device rest, refer to troubleshooting.
6 General information and safety
ENGLISH