ge.com
Metal Marks and Scratches
%
Be careful not to slide pots and pans
across gour cooktop. It will leave
metal markings on the cooktop
surface.
These marks are removable using
the CERAMA BRYTE ®Ceramic Cooktop
Cleaner with the CERAMABRYTE ®
Cleaning Padfor Ceramic Cooktops.
[_
If pots with a thin overlay of
aluminum or copper are allowed
to boil drg, the overlag mag leave
black discoloration on the cooktop.
This should be removed
immediatelg before heating
again or the discoloration mag
be permanent.
WARNING:Carefully checkthe bottom of
pans for roughness that would scratch
the cooktop.
Glasssurface--potential for permanentdamage.
Our testing shows that if
you are cooking high sugar
mixtures such as jelly or
fudge and have a spillover,
it can cause permanent
damage to the glass
surface unless the spillover
is immediately removed.
Damage from Sugary Spills and Melted Plastic
_]
Turn off all surface elements. Remove
hot pans.
[]
Wearing an oven mitt:
a. Use a single-edge razor blade
scraper (CERAMA BRYTE ® Ceramic
Cooktop Scraper)to move the spill
to a cool area on the cooktop.
b. Removethe spill with paper towels.
r3] Any remaining spillover should be left
until the surface of the cooktop has
cooled.
[_
Don't use the surface elements again
until all of the residue has been
completelg removed.
NOTE:If pitting or indentation in the glass
surface has already occurred, the cooktop
glass will have to be replaced.In this case,
service will be necessarg.
To Order Parts
To order CERAMABRYTE ® Ceramic Cooktop
Cleaner and the cooktop scraper, please
call our toll-free number:
National Parts Center
800.626.2002
CERAMABRVTE ®Ceramic
Cooktop Cleaner ............
# WXI OX300
CERAMABRVTE ®Ceramic
Cooktop Scraper ...........
# WXI OX0302
Kit ............................
# WB64XS027
(Kitincludes cream and cooktop scraper)
CERAMABRVTE ®Cleaning Pads for
Ceramic Cooktops ......... # WX10X350
17