Crafstman 358.341190 Manual Del Operador página 7

double insulation system o nly provides
added p rotection against injury r esult-
ingfrom aninternal electrical insulation
failure.
WARNING: All e lectrical repairs
tothis unit, including housing, switch,
motor, etc., m ust bediagnosed and re-
paired b yqualified service personnel.
Replacement parts f oradouble insu-
lated appliance must beidentical tothe
parts t hey replace. Adouble insulated
appliance ismarked with the words
"double insulation" or"double insu-
lated". The symbol [] (square within a
square) may also bemarked onthe
appliance. Failure tohave t he unit r e-
paired bySears service personnel can
cause the double insulation construc-
tion tobecome ineffective and result in
serious injury.
STANDARDS: This product islisted b y
Underwriters Laboratories, Inc. i nac-
cordance with ULStandard 1662 a nd
ANSI B175.1.
ANSI B175.1-2000 "American Nation-
alStandard forPowered Tools - Safe-
tyRequirements".
SAVE THESEINSTRUCTIONS
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358.341190
• Chain Saw (fully assembled)
• Bar Sheath
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance or find
that parts are missing or damaged,
please call 1-800-235-5878.
ASSEMBLY
Your unit is fully assembled; no assem-
bly is required.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
_. - - Handguard
Bar Oil Cap
Trigger Lockout
Power
Cord
Sprocket Bar Knob
Trigger Cover Chain
Switch Tension Ring
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze the trigger switch
to operate the unit after lock-out but-
ton has been pushed forward. Release
the trigger to turn the unit off.
TRIGGER LOCK-OUT BUTTON
The TRIGGER LOCK-OUT button is a
control feature designed to prevent the
motor from being accidentally started.
When the rear handle is gripped in a
normal cutting position, the trigger
Bar Chain
lock-out button can be pushed forward
by the thumb, permitting the index fin-
ger to squeeze the trigger. It is not nec-
essary to maintain pressure on the
trigger lock-out button once the trigger
has been engaged.
BAR OIL CAP
The BAR OIL CAP is used to fill the bar
oil tank.
CHAIN TENSION RING
The CHAIN TENSION RING is used to
adjust the chain tension.