Descargar Imprimir esta página

Whittier Wood Products Mission 314Wa Instrucciones Para Armar

Mesa de centro

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
314Wa
Mission Coffee Table
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
O O u u t t s s ide
ide U U . . S. or Canada:
S. or Canada: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 0 0 2 2 1 1 3 3
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
M M a a i i l l : : P P . . O O . . B B o o x 28
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
x 282 2 7 •
7 • E E ugen
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
ugene e , , O O r r egon
egon 9 9 7 7 4 4 0 0 2, 2, U U . . S S . . A A . .
Rev. 5/07

Publicidad

loading

Resumen de contenidos para Whittier Wood Products Mission 314Wa

  • Página 1 Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 314Wa Mission Coffee Table — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on parts list below. Lay out the wood parts in their approximate locations to aid in the identification and assembly. Aa –...
  • Página 3 314Wa Mission Coffee Table ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Slotted Screwdriver 9/16" or Adjustable Wrench, Rubber Mallet or Padded Hammer, Wood Glue IMPORTANT: WE RECOMMEND FINISHING THE UNIT BEFORE ASSEMBLY. Before finishing, read enclosed finishing hints. READ RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW.
  • Página 4 Z x 4 J x 4 I x 4 FIG. 3A FIG. 3B 3) Place a bead of glue across each end of the front side of Leg Bracket(Z). See FIGURE 3A. Insert a 3/8” x 2 ½” Hex Bolt(I) with a Washer(J) through the leg bracket into the Insert Nut(X) in the leg and fasten securely.
  • Página 5 Modelo # 314Wa Mesa de Centro Mission Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con Instrucciones para Armar el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 6 314Wa Mesa de Centro Mission Lista de piezas ANTES DE ENSAMBLAR, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Coloque las piezas de madera aproximadamente en su posición para ayudar a identificarlas y armarlas. Aa –...
  • Página 7 No. de modèle 314Wa Table Basse Politique de service : Nous remplacerons Mission toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Instructions de Montage Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 8 314Wa Table Basse Mission Liste des pièces AVANT DE COMMENCER LE MONTAGE: Assurez-vous que les quantités des pièces reçues correspondent à la nomenclature des pièces figurant ci-dessous. Disposer les pièces en bois à leurs emplacements approximatifsafin de faciliter l’identification et l’assemblage. Aa –...
  • Página 9 RAFIX ATTACHMENT SYSTEM With the RAFIX SYSTEM, assembly is simplified. RAFIX CAM RAFIX BOLT Shoulder must TOP VIEW be flush with the wood! 1) Insert the Rafix Bolt in the panel so 2) Tap Rafix Cam into the appropri- that the shoulder is flush with the ate hole with the notch facing the surface of the wood.
  • Página 10 SYSTÈME D’ATTACHE RAFIX INSTRUCTIONS Avec le SYSTÈME RAFIX, le montage est simplifi é. CAME RAFIX BOULON RAFIX L’épaulement doit être VUE HAUT à ras du bois ! 1) Introduisez le boulon Rafi x 2) Enfoncez la came Rafi x dans le dans le panneau, de manière à...
  • Página 11 SISTEMA DE FIJACIÓN RAFIX INSTRUCCIONES Con el SISTEMA RAFIX, el armado se simplifi ca. LEVA RAFIX PERNO RAFIX ¡El reborde debe estar VISIÓN CIMA al ras con la madera! 1) Inserte el Perno Rafi x en el 2) Con golpecitos leves inserte la panel de manera que el reborde Leva Rafi...