Additional Function - NORAUTO START PRO Manual De Información Del Producto

ADDITIONAL FUNCTION

Charge Phone QC3.0:
Wall Plug:
To recharge the device, firstly, connect the
charging output port of the provided charger
(WJG-Y131400900W) to the product input
port, and then connect the charger plug to
the 230V power supply. At this time, the
percentage in LCD will display the charging
status. After fully charged, the "Charging
icon" on the top right will be stopped blinking.
LCD
%
30%
2 x USB ports (2) compatible with QC3.0 fast
charge technology is available on the side of the
jump starter. Connect the USB cable to the USB
output port of the device, press and hold the
power switch (8) for 3 seconds to turn on the unit;
the device will start to charge. The USB output
will be automatically turned off after charging is
completed.
LED Light:
LED Light: Press and hold the power switch
(8) for 3 seconds to turn on the unit.
- 1st short press: Working light
- 2nd short press: Flashlight,
- 3rd short press: Light Off.
66
OFF