Publicidad
Idiomas disponibles
Idiomas disponibles
Extension Cords
AN EXTENSION CORD
SHOULD NOT BE USED
UNLESS ABSOLUTELY NECESSARY. Use of
improper extension cord could result in risk of
fire and electrical shock. If an extension cord is
used, make sure:
a.
The pins on plug of extension cord are the
same number, size, and shape as those of
plug on charger.
b.
The extension cord is properly wired and in
good electrical condition.
c.
The wire size is large enough for AC ampere
rating of charger as specified below:
Length of
25
Cord, Feet
AWG Size of
18
Cord
d.
An extension cord is a temporary solution.
Move the charger to a standard receptacle as
soon as the job has been completed.
Important Charging Notes
1.
The charger was designed to fast charge the
battery only when the battery temperature
is between 32˚F (0˚C) and 113˚F (45˚C).
If the battery pack is too hot or too cold, the
charger will not begin charging the battery.
(This may happen if the battery pack is
hot from heavy use). Once the battery
temperature returns to its safe charging
temperature, between 32°F (0°C) and 113°F
(45°C), the charger will automatically begin
charging.
2.
A substantial drop in operating time per
charge may mean that the battery pack is
nearing the end of its life and should be
replaced.
3.
Remember to unplug charger during storage
period.
4.
If battery does not charge properly:
a. Check for voltage at outlet by plugging in
some other electrical device.
b. Check to see if outlet is connected to a light
switch which turns power "off" when lights
are turned off.
Charger Safety Rules
Electronic Cell Protection (ECP)
50
100
150
16
16
14
SAVE THESE INSTRUCTIONS
4
c. Check battery pack terminals and charger
connectors for dirt. Clean with cotton swab
and alcohol if necessary.
d. If you still do not get proper charging, take
or send tool, battery pack and charger to
your local Bosch Service Center. See "Tools,
Electric" in the Yellow Pages for names and
addresses.
Note: Use of chargers or battery packs not sold
by Bosch will void the warranty.
The lithium ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the tool is
switched off by means of a protective circuit.
The battery is supplied partially charged.
Completely charge the battery before using
your cordless power tool for the first time. The
lithium ion battery can be charged at any time,
without reducing its service life. Interrupting
the charging procedure does not damage the
battery.
Publicidad
