Black and Decker BEHTS451-QS Manual Del Usuario página 8

Troubleshooting
Problem Possible Cause
Slow running, noisy or Dry, corroded blades.
hot blades.
Blades or blade support
bent.
Bent or damaged teeth.
Loose blade bolts.
Unit will not start. Lock off not fully
operated.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.
Technical data
BEHTS301
Voltage V
AC
Power input W
Blade strokes
min
-1
(no load)
Blade length cm
Blade gap mm
Blade brake
s
time
Saw blade Max
mm
cut
Weight kg
Possible Solution
Lubricate blades.
Straighten blade or
blade support.
Straighten teeth.
Tighten blade bolts.
Check that lock off is
fully forward prior to
moving main trigger.
Plug cord into a work-
ing outlet.
Replace circuit fuse.
(If the product repeat-
edly causes the circuit
fuse to blow, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Reset circuit breaker.
(If the product repeat-
edly causes the circuit
breaker to trip, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Have cord or
switch replaced at
BLACK+DECKER
Service Center or
Authorized Servicer.
BEHTS401 BEHTS451
Type 1 Type 1
230 230
500 500
1850 1835
50 55
22 22
<1 <1
35 35
2.47 2.54
Voltage
Power input
Blade strokes
(no load)
Blade length
Blade gap
Blade brake
time
Saw blade Max
cut
Weight
Level of sound pressure according to EN 60745:
Sound pressure level at operator position (L
Sound power level (L
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
EC declaration of conformity
BEHTS301, BEHTS401, BEHTS451, BEHTS501 – Hedge
Type 1
Black & Decker declares that these products described under
230
"technical data" are in compliance with:
550
2006/42/EC, EN 60745-1:2009 +A11:2010,
1870
60
2000/14/EC, Hedge trimmer, Annex V
Measured sound power level (L
25
<1
Guaranteed sound power (L
35
These products also comply with Directive
2.65
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
BEHTS501
Type 1
V 230
AC
W 600
min 1840
-1
cm 60
mm 25
s <1
mm 35
kg 2.65
) 89 dB(A), uncertainty (K) 3.5 dB(A)
pA
) 98 dB(A), uncertainty (K) 2.0 dB(A)
WA
) 4.1 m/s , uncertainty (K) 2.1 m/s
2
h, D
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
Trimmer
EN 60745-2-15:2009 +A1:2010
Uncertainty (K) 2,0 dB(A)
wA
2014/30/EU and 2011/65/EU.
2
) 98 dB(A)
wA
) 100 dB(A)