Publicidad
Idiomas disponibles
Idiomas disponibles
How to Operate Your Ceiling Fan (Continued)
4.
To set the remote code in the same positions as
the receiver, use a small screwdriver or ball point pen
(neither included) to slide dip switches firmly up or
down. (Figure 4)
NOTE: Factory setting is all up. Do not use this
position.
NOTE: The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the
combination code in the remote and receiver.
5.
Remote functions: (Figure 5)
•
Indicator LED light: fan speed
•
button: Turns fan off.
• Fan Speed:
Turns fan on and turns speed up.
Turns fan on and turns speed down.
•
Light button: Turns light on and off.
Increases light output level.
Decreases light output level.
• Sleep Timer:
Tap and the fan and light will turn off after
1 hour.
Tap and the fan and light will turn off after
3 hours.
Tap and the fan and light will turn off after
6 hours.
6.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Slide the reverse switch on the motor assembly to the
opposite position and turn fan on again. (Figure 6)
Reverse Switch Information
Season
Rotation Direction
Summer
Counterclockwise
Winter
Clockwise
Switch Position
Left
Right
15
ON
DIP
1
2
3
4
5
Dip Switch
Figure 4
Figure 5
Figure 6
Remote
Reverse Switch
Publicidad
