Exhaust Tubes Connection; Connections - Lincar Olga 502 Manual Del Usuario - Mantenimiento

EXHAUST TUBES CONNECTION

•
This operation must be effected by qualified staff ,only.
•
The appliance has the possibility to be connected to the
fume evacuation chimney in the following ways: Vertical
or Lateral or Rear.
Vertical connection:
Unscrew and remove the upper tap.
Now it is possible to connect the exhaust fume tube to the
exhaust fan.
In this case the curve tube supplies must not be Utilized..
Lateral connection
Take the curve tube placed into the combustion chamber.
Unscrew the rear and front screws which fix the side and
remove it..
Pay the maximum attention to the electrical wirings and

connections.

Take away the round grate from the side paying attention to
not damage the paint-
Insert the curve tube onto the exhaust fan, positioning it
laterally.
Re assemble the side, screw the front and rear screws paying
attention to not damage the electrical wiring.
Rear connection
Take the curve tube placed into the combustion chamber.
Unscrew the rear and front screws which fix the side and
remove it..
Unscrew and remove the back exhaust cover and remove it,
now unscrew the screws which fix the Back in the zone of
the fume exhaust (lh)
Pay the maximum attention to the electrical wiring and
connections.. Insert the curve tube onto the exhaust fan,
positioning it towards the back
Re assemble the back and the side, screw their screws
paying attention to not damage the electrical wiring.
In case that the installation needs the application of a "T"
pipe fitting among the appliance and the exhaust tube, only
the rear or lateral exhausts can be utilized.
ANTI TILTING SYSTEM
The appliance is equipped with a security device, which avoids the accidental tilting.
It is obligatory to fix the appliance in a mechanical way from the back to the wall by mean of the
chain, which is included with the appliance. Unscrew and srew again the screw which fixes the back
of the appliance. The fixing must be effected in a secure stabile way.
IT-GB-FR-ES mod. 502-502X-502L-502LX
40/120