Safety; Automatic Safety Features - Lincar Olga 502 Manual Del Usuario - Mantenimiento

SAFETY

•
Easy to use, safety of operation. The digital control panel controls the combined action
of the gas combustion fan, of the fuel loading, of the convection fan and of the control of
the room temperature. This control system grants the best combustion and functioning
conditions, reducing to the minimum the costs of functioning.
•
Maximum efficiency, minimum emissions. The large heat exchange surface, together
with an optimal control of the combustion air, provides an excellent yield of the fuel.
The release of the pellets dosed in the brazier, allows a complete combustion with low
emissions in the exhaust gas.

AUTOMATIC SAFETY FEATURES

•
Voltage drop. Even after a brief voltage drop, the unit stops and then restarts,
resuming the normal operation or restarting the automatic ignition phase,
without any security risk.
•
Shutdown due to overheating. In the event of abnormal heating of the appliance, the
security system intervenes and switch off the stove. The stove can then be switched on
again after leaving it to cool for at least 45 minutes. The persistence of this condition
must be verified by the service center or qualified personnel
•
Low-temperature shutdown. If the temperature of the appliance drops down to a certain
value, the unit turns off (for example the finishing of the fuel). This can also be switch
off can also accur if the lighting phase takes to much time. The stove must then be re
switched on again The persistence of this condition must be verified by the service center
or qualified personnel.
•
Electrical rotection device for overcurrent. The appliance is protected against
overcurrent by a fuse
For its replacement, contact Technical Service
IT-GB-FR-ES mod. 502-502X-502L-502LX
(
see technical data) placed on the electronic card.
49/120
.