Pioneer PDP-508XG Manual De Instrucciones página 57

Using the HDMI Control
On-screen control panel
For an AV system
Switches the surround mode in
1
HDMI Control
5
order
   
Switches the input source in
2
1 6
SURROUND+
reverse order
2 7
Switches the surround mode in
3
INPUT- INPUT+
reverse order
3
Closes the screen to return to the
4
SURROUND-
HDMI Control menu
4
HDMI CONTROL HDMI CONTROL Exit
Displays the model number of the
5
connected device
Void
6
Switches the input source in order
7
Press  or  on the remote control unit of the plasma television
to switch the surround mode in order or in reverse order,  or 
to switch the input source in order or in reverse order. Pressing
HDMI CONTROL turns the control panel screen off to return to the
HDMI Control menu.
Note
• You cannot operate the recorder/player when you press  or
 to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
Skips commercials
1
HDMI Control
5
Fast reverse
2
   
Stops playback
3
1 6
Closes the screen to return to the
4
2 7
HDMI Control menu
Displays the model number of the
3 5
connected device
Starts playback
4 6
HDMI CONTROL HDMI CONTROL Exit
Fast forward
7
Press  or  on the remote control unit of the plasma television
to select fast reverse or fast forward mode,  to skip commercials
or  to stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the HDMI
Control menu.
For a player
Displays the DVD disc menu or
1
HDMI Control
5
Blu-ray disc's pop-up menu on the
   
player
1 6
Fast reverse
2
MENU
2 7
Stops playback
3
Closes the screen to return to the
3 4
HDMI Control menu
Displays the model number of the
4 5
HDMI CONTROL HDMI CONTROL Exit
connected device
Starts playback
6
Fast forward
7
Press  or  on the remote control unit of the plasma television to
select fast reverse or fast forward mode,  to display the DVD disc
menu or Blu-ray disc's pop-up menu on the player or  to stop
playback. Pressing ENTER starts playback and HDMI CONTROL
turns the control panel screen off to return to the HDMI Control
menu.
Making the HDMI Control connections
When you make changes in connections between the plasma
television and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1 Turn on the plasma television and all the connected devices.
2 Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected devices.
Also confirm the HDMI Control related settings in the connected
devices.
3 Switch to the HDMI input terminals to which the devices are
connected to check if audio and video images are properly output
and displayed.
4 Try turning off the plasma television, then turn the power back
on to the plasma television.
Connecting an AV amp/DVD recorder/BD player
MONITOR OUT WOOFER SUB
(Rear view)
MONITOR SUB
OUT WOOFER
Stereo
audio cable
AV amp
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder BD player
The PDP-508XG/PDP-428XG does not support S/PDIF. When
connecting the plasma television to an AV system, use the
MONITOR OUT terminal.
11
HDMI compliant cable
(HDMI cable having the
HDMI mark)
57
En