KTM 6201292700004 Manual Del Usuario página 7

Mounting the cover trim (optionally available):
- Mount the range change metal nuts (scope of delivery of the trim)
on the trim.
- Position the trim on the Top Case cover, mount with screws and
seal rings from the inside (scope of delivery of the trim) and tighten.
Universal mounting:
- Move the carrier plate (included) to the mounting position.

- Mount and tighten screws M6x35
hex nuts (all included).

Mounting the SMT model:
- Move the carrier plate (included) to the mounting position.

- Mount and tighten screws M6x40
hex nuts (all included).

Opening the case:
- Set the key (included) to "Open".

- Push in the lock and the handle opens.
, bushings , washers
  
, bushings , washers
  
and
and
7