KRHÜNER 52928 Manual De Instrucciones página 18

• Rotate out the fi lter as shown below.
• Take out the HEPA fi lter fi rst, then lift up the cover.
• Wash the mesh fi lter and the air intake fi lter.
• Please dry the HEPA fi lter and the mesh fi lter com-
pletely before pu� ng them back in the dustbin. The
dustbin and the mesh fi lter should be air-dried com-
pletely before reinstalling. When dry, assemble the fi lter to the mesh fi lter.
• Aft er drying, assemble the fi lter to the case completely before assemble it back.
CLEAN UP THE AIR HEPA FILTER
• Rotate the air outlet HEPA to the left , and pull
it out gently.
• Tap the ground to remove the dust from the
HEPA fi lter.
• lf there is too much dust, wash the HEPA fi lter
with water, dry it thoroughly and install it into the
main body.