Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Vacuum does not pick up
debris
Brush roller does not spin Brush roller clogged by
Poor suction
Vacuum suddenly turns
off
Vacuum won't turn ON or
charge
Short running time
Possible cause
1. Dustbin is full
2. Filters clogged or dirty
3. Filters are out of
service
hair, fibers, etc.
1. Dustbin not seated
completely
2. Filters clogged or dirty
3. Dustbin not installed
correctly
4. Low battery
5. Nozzle or dirt passage
clogged
1. Dustbin is full
2. Filters clogged or dirty
3. Vacuum overheat
1. Low battery
2. Vacuum overheat
1. Low power
2. Filters clogged or dirty
Possible solution
1. Empty the dustbin
2. Clean the filters
3. Change the worn filters
Clean the brush roller
1. Reinstall the dustbin.
Make sure the lid is closed
completely
2. Clean the filters
3. Reinstall the dustbin
4. Fully charge the battery
5. Disconnect the nozzle
to remove debris
1. Empty the dustbin
2. Clean the filters
3. Let the vacuum cool
down and
retry
1. Fully charge the battery
2. Let the vacuum cool
down and
retry
1. Fully charge the battery
2. Clean the filters
Publicidad
