Relags Origin Outdoors MINI Manual De Instrucciones página 3

ENG INSTRUCTION MANUAL
Thank you for purchasing the Origin Outdoors gas lantern 'Mini'. We hope you enjoy using this product.
Please read these operating instructions carefully.
CONTENT:
Please open the packaging first and check that the contents are complete:
1 x gas lantern / 1 x incandescent gas mantle / 1 x fastening chain / 1 x transport bag / 1 x operating instructions
SPECIFICATIONS:
Usable: outdoors
Power: 600 Watt
Weight: 152 g
Consumption: approx. 33 g / hour
Pack size: Ø 6 x 11 cm
Fuel: valve gas cartridge butane / propane mixture
WARNINGS / SAFETY:
1. Please check that the gas connection and all screws are screwed tight. Do not connect the gas cartridge until you
are sure that the gas lantern is ready for use.
2. Do not use indoors. This applies to tents, vehicles or other enclosed areas. Carbon monoxide poisoning can
cause serious injury or even death. Ensure there is adequate ventilation.
3. If there is a smell of gas, check the lantern for a gas leak. Do not use the lantern if you hear it hiss or detect a
leak.
4. Make sure that the lantern is placed on a level surface.
5. Never hold your head or body over the lantern during lighting or while it is burning. Keep clothing and other
flammable materials away from the lantern. The minimum distance upwards should at least be 1.25 m and to the
sides at least 0.3 m.
6. Never disconnect the lantern from the gas cartridge during operation. Do not remove the cartridge while the
lantern is still hot or near a flame or heat source. If you forget to close the control knob, ventilate the area well
before lighting the lantern.
7. Never leave the lantern burning or hot unattended.
8. Do not allow children to use the lantern.
9. Use the lantern only as described in the instructions. Use only original spare parts. Before taking the lantern on a
long trip, check for fuel leaks and practice using and maintaining it.
BEFORE OPERATING THE GAS LANTERN:
1. Make sure that the control knob is turned to the closed position.
2. Check that the gaskets are properly fitted and in good condition.
3. Hold the gas cartridge upright when attaching it to the lantern. Screw the gas cartridge on only hand-tight. Do not
overtighten or the gas cartridge valve could be damaged.
4. Make sure that the lantern is properly connected to the gas cartridge and that there are no signs of leakage.
OPERATING THE GAS LANTERN:
1. Open the top cover of the lantern, remove the metal cover and insert the gas mantle properly into the lantern
over the piezo ignition. Make sure that the mantle is evenly distributed around the burner tube.
2. Light the mantle with a lighter and wait until it burns off and goes out. A white envelope of the gas mantle should
now be left. Caution. This is now fragile and should not be touched.
3. Now carefully open the control knob with a 3/4 turn clockwise (+) and make sure that the gas flows out. Press the
piezo ignition button and make sure that the burner ignites.
4. After use, turn the knob anticlockwise (-) to the off position. Wait until the lantern has cooled down before storing
it.
AFTER USE:
1. Make sure the control knob is closed and the lantern has cooled down.
2. Turn the lantern anticlockwise until it comes off the gas cartridge. Some gas may escape when unscrewing the
cartridge.
3. Pack the lantern into the transport bag provided.
SERVICE & CONTACT:
Relags® GmbH · Im Grund 6-10 · 83104 Tuntenhausen · Tel: +49 (0)8065-9039-0 · www.relags.de