Maintenance; Adjusting The Guide Of The Machine Slide; Replacing The Carbon Brushes; After-Sales Service/Service - Sunitec MAB 825 Instrucciones De Manejo

Maintenance

Maintenance

Adjusting the guide of the machine slide

Replacing the carbon brushes

After-Sales Service/Service

CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 • Email: info@csunitec.com • Website: www.csunitec.com
58
WARNING
Danger caused by unqualified repairs!
Unqualified repairs can pose considerable dangers for the user
and cause damage to the machine.
► Repairs to electrical appliances may only be carried out by
the works after-sales service or by specialists trained by the
manufacturer.
If the guide of the machine slide (15) shows signs of backlash, it
must be adjusted. Proceed as follows:
Loosen the clamping bolts.
‹
Tighten the adjusting screws uniformly.
‹
Tighten the clamping bolts again.
‹
Replacement of the carbon brushes may only be carried out by
BDS or by an authorised repair workshop. Unauthorised repairs
will void the warranty.
Should you have any questions about after-sales service or
service, please contact BDS. We will be happy to give you the ad-
dress of your nearest service partner.
MAB 825/845