Reer VapoDryS Manual De Uso página 6

Start-up
Please rinse off all items to be disinfected in advance and remove all food residues. Position the bottles and acces-
sories in such a way that the walls and lid are not touched.
GB
1. Pour 90 ml (max.) of water on the hotplate.
2. Place the disinfecting container on the base.
3. Place the cleaned baby bottles in the disinfecting container with the opening facing down.
4. For the additional disinfecting of small items, place the accessories basket on the disinfecting container. The
accessories basket can also be used without the disinfecting container on the device.
5. Arrange the bottles and accessories as depicted and put the lid on.
6. Connect the power cord. Press the on/off button to turn the device on.
1 2
4 5
8
3
6
Press the function button to select the mode:
Automatic disinfecting and drying
Press the function button once to select the mode "Automatic disinfecting and drying". The control
light will flash automatically for 5 seconds. The device will then start disinfecting for 10 minutes
followed by 30 minutes of drying. The bottles will then be ready for use directly.
Disinfecting
Press the function button twice to select the mode "Disinfecting". The control light will flash automatically
for 5 seconds. The device will then start disinfecting for 10 minutes. After disinfecting is complete, the
device will beep three times.
Drying function
Press the function button three times to select the mode "Dry for 30 minutes". The display will flash
automatically for 5 seconds. The device will then start drying for 30 minutes. After the drying process is
finished, the device will beep three times.
Descaling function
CALC
Press the function button four times to select the mode "Descaling". The descaling programme takes
around 12 minutes.
The steriliser switches off automatically once the disinfecting and drying process has finished. Please wait a few
minutes before removing the lid to allow the device to cool down.
For hygiene reasons and to ensure that as few limescale deposits as possible arise, we recommend cleaning the
steriliser, the basket and the lid with a cloth after every use and removing the water left behind in the steam
container. Always unplug the power cord and ensure that the device is cold before cleaning it. Do not submerge
the device in water. The basket, lid and attachment for baby bottles are dishwasher-safe. Do not use scouring pads,
scouring agents or solvents for cleaning, as these may damage the device and its surfaces.
Please ensure that the filter at the bottom of the product does not get
dusty. The disinfecting device must be descaled regularly to guarantee
that the device works perfectly. For this reason, a reminder to descale the
device appears after a total of 25 cycles. Use approx. 30 ml of water (3
tablespoons) + approx. 30 ml of vinegar (3 tablespoons) and pour it
onto the hotplate. Then place the lid (without the disinfecting container
and the accessories basket) on the base and start the descaling function.
Please do not use any chemical additives for descaling.
Functions
GB
Cleaning
Descaling
9