Kenmore PG-40409S0LB-1 Manual De Uso Y Cuidado página 20

Front Door
3
□ Remove the (4) M5x15 screws pre-assembled to the door handle ends, and use them to
attach handles to doors. See A.
□ Insert the pin at the top of each door through the hole in the door bracket hinge. Insert the pin at
the bottom of each door into the hole on the bottom panel. See B.
IMPORTANT: If the doors do not line up when closed or do not close freely, the hinges may need to
be adjusted. Loosen the hinge screws, adjust the hinge position as necessary, and retighten screws.
See B.
20
A
B