Publicidad
Idiomas disponibles
Idiomas disponibles
4. INTENDED USE
This tool is intended for finishing and trimming (interior
and exterior), such as door & window casing, door
jambs, baseboard, crown molding, cabinetry, cap and
shoe molding, molding, staircases, door & window
trimming, chair rail, brickmolding, hardwood flooring,
paneling, furniture, etc.
5. OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
WARNING: Keep the tool pointed away from
yourself and others when loading staples.
Always remove the staples and battery pack when
tool is not in use. Failure to do so could result in
possible serious personal injury
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Installing/removing the battery
pack
Charging the battery pack
ASSEMBLY
Installing the belt hook
NOTE: The belt hook can be
installed on the left or right side
of the stapler.
20V 18Ga Cordless Narrow Crown Stapler
Loading the tool with crown
staples
1. Remove the battery pack if
installed.
2. Squeeze the magazine release
button located on the rear of
the magazine and slide the
magazine cover open
3. Place crown staples in the
upper left corner of channel
4. Push the magazine cover
closed until it securely snaps
into place, you may now reinstall
battery pack
pointed away from yourself and
others when loading staples.
Failure to do so could result in
possible serious personal injury.
OPERATION
Selecting the stapling mode
Single sequential actuation
mode: Provides accurate staple
FIGURE
placement
Contact actuation mode:
Allows for fast repetitive staple
placement
See Fig. A1, A2
See Fig. A3
if the selector is not securely
seated in either position. Always
assure the selector is seated
properly to avoid an unexpected
staple discharge and possible
See Fig. B
serious personal injury.
WARNING: Use safety
gloves. Keep the tool
WARNING: The stapler
will not function properly
See Fig. C1, C2
11
See Fig. D
EN
Publicidad
