cecotec CONGA ROCKSTAR 3000 ADVANCE ERGOWET Manual De Instrucciones página 23

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Vacuuming brush head release button
2. Vacuuming tube release button
3. Dust tank bottom cover unlock button
4. Dust tank opening button and filter access
5. Vacuuming brush head
6. On/Off button
7. Power adapter
8. Charging base
9. Jaliscazo brush
10. 2-in-1 narrow accessory for corners and furniture
11. 2-in-1 wide accessory for corners and furniture
12. Motorised Upholstery Brush
13. Union elbow
14. Long brush
15. Extensible tube
16. Flexible vacuuming tube
17. Water tank
18. Special brush for fabrics
Fig. 2
1. Display
2. speed-dial
3. On/Off button
4. Battery
5. Battery release button
PLEASE NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport.
Take the product out of the box and remove all packaging materials. Keep the original box
and other elements in a safe place, as this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
44
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
- Fully charge the device before the first use.
- Remove the first-use tab installed in the filter.
- During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
- The normal charge time is 6 hours approx. When the battery is fully charged, unplug it.
Box contents
- Conga Rockstar 3000 Advance ErgoWet Vacuum Cleaner
- 2-in-1 narrow accessory for corners and furniture
- 2-in-1 wide accessory for corners and furniture
- Jaliscazo brush
- Motorised brush for upholstery
- Long brush
- Special brush for fabrics
- Union elbow
- Flexible vacuuming tube
- Extensible tube
- Watertank accessory
- Charging base
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both making sure the
tab on the brush head matches the guides on the tube, and introduce one into the other
until they are firmly fixed.
- To disassemble them, press the vacuuming brush head release button, and pull from the
vacuuming tube while you hold the vacuuming brush head.
Warning
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
ENGLISH
CONGA ROCKSTAR 3000 ADVANCE ERGOWET 45