ENGLISH
How to remove the battery
Press the battery release button and remove the battery as shown in figure 13. Store the
battery in a plastic bag and leave it in a dry place.
Device storage
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
Maintenance indicator
If maintenance has not been carried out frequently enough, the appliance will display a full
tank or clogged filter icon on the screen. Fig. 14-15
7. TROUBLESHOOTING
Problem
The motor does not operate
The suction power decreased
and the appliance makes a lot
of noise.
Insufficient operating time
after charging the device.
(The battery life may vary
according to the room
temperature).
54
Possible cause
The battery does not work
any longer.
The metallic tubes, floor
brushes, batteries or
the device itself are not
properly assembled.
The dust tank is full. Fig. 14
The filter has too much
dust. Fig. 15
The electric rotary brush
inlet is obstructed or the
brush is blocked. Fig. 16
Insufficient charge time.
The battery is old.
Solution
Charge the vacuum cleaner.
Make sure all parts of
the device are correctly
assembled.
Clean the dirt.
Clean or replace the filter.
Clean the dust inside the
electric rotary brush.
Fully charge the battery
following the instructions in
this manual.
Batteries are easily
recycled. Go to the closest
maintenance point and buy
new batteries.