ENGLISH
How to avoid damaging surfaces
A surface is damaged when the water impact force is greater than the hardness of the surface.
The impact force will vary according to the settings mentioned above. Never use a direct jet
on surfaces susceptible to damage. Avoid spraying windows with the direct jet, as they may
break.
The best way to avoid damaging surfaces is to follow these steps:
1. Before pressing the trigger, move the spray nozzle to the fan spray position.
2. Follow the distance and angle instructions mentioned above.
3. Vary the angle of the jet, the type of jet, and the distance from the surface to be cleaned
until efficient cleaning is achieved without damaging the surface.
Attachments
3D TurboFlip nozzle
The 3D TurboFlip nozzle, also defined as a rotating nozzle, is a very effective accessory to
significantly reduce cleaning time. It must be used to clean in Turbo mode, explained in the
previous section. This accessory is attached to the lance.
Soap bottle
This model includes an accessory to apply soap while in operation. The use of soaps may
reduce the cleaning time and make dirt removal easier. Some soaps have been designed for
use in pressure washers and specific cleaning tasks. The use of thick soaps, like the soap used
with tableware, can clog the injection system with chemical products.
Note
Soaps work better when applying them on spray mode.
The chemical action combined with high-pressure rinses in concentrated mode is very effective.
In vertical surfaces, apply soap from bottom to top. This will prevent soap from dripping down
and creating stains. High-pressure rinses can also be carried out from bottom to top. With
stains especially difficult to remove you may need to use a brush along with soap and high-
pressure rinses. Follow the instructions in the next section to use this accessory. Fig. 7
Anti-impurities filter
This model includes a transparent male connector with a filter that can be assembled with
the hose to prevent the dust from getting through. This accessory is inserted into the water
outlet (6).
360Brush special for wheel rims
This model includes a specific brush for car rims made of bristles, which can remove the
74
HYDROBOOST 2000 CAR&GARDEN PRO