Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
BUMP FIRE
(CONTACT TRIP) OPERATION
1.
Position the nose of the tool over the work surface, near the area where the first
fastener is to be driven.
2.
Squeeze and hold the trigger in the depressed position.
3.
Bump the workpiece contact (safety) against the work surface at each point where a
fastener is to be driven.
4.
Using a bouncing motion, continue moving the tool into position for each fastener drive.
5.
When fastening is completed, release the trigger.
12
Publicidad
