Publicidad
Idiomas disponibles
Idiomas disponibles
24/25
08. Instalation
INCORRECT INSTALLATION OF THE MACHINE MAY CAUSE DAMAGE
TO PEOPLE, ANIMALS OR OBJECTS. THE MANUFACTURER CANNOT
BE CONSIDERED RESPONSIBLE FOR THESE DAMAGES
08.1. Transport and discharge
The remover is delivered packaged. It must be transported and stored according to the indications
on the packaging. Due to the low weight of the remover can be moved by two people without using
other means.
08.2. Arrangement of the lighting system
The Client must make sure that there is suitable lighting for the surroundings and that the lighting
conforms to the regulations in force. In particular, the Client must arrange the positioning of
lighting that illuminates all the working area.
08.3. Arrangement of the pneumatic system
The Client must arrange a line of filtered compressed air supplied by a compressor that is suitable
for the consumption required.
Do not use compressed air that contains chemical products, synthetic oil with organic solvents,
salts or corrosive gases as they can cause damage or malfunctioning.
The line of compressed air must arrive up to the supply points of the machine. If the compressed
air contains a large amount of moisture, it may cause malfunctioning in the valves and in the
pneumatic components. Install a moisture separator downstream from the compressor to avoid
this.
08.4. Equipment assembly
---->
Compressor air
---->
Air
----> Product
YOU MUST ALWAYS CONNECT THE EQUIPMENT AND ALL THE ELEMENTS
INVOLVED IN THE WORK PROCESS TO A GROUNDING CONNECTION TO
ELIMINATE STATIC ELECTRICITY.
ENGLISH
Compressor
Publicidad
