cecotec CONGA 2299 INERTIAL X-TREME Manual De Instrucciones página 57

The main brush does not
spin.
The robot vacuum cleaner
movements or route are
unusual.
7. TECHNICAL SPECIFICATIONS
Conga 2299 Inertial X-Treme / X/ T/ S/ M
Product reference: 05867/ 08086/ 08087/ 08088/ 08089
Voltage: 100-240 V AC 50/60 Hz
Battery: 14.4 V DC Li-ion 2600mAh
Frequency bands: 2.4 GHz
Maximum Transmission Power: 17.5 dBm
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or batteries must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old electrical and electronic appliances
and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
9. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the official Cecotec Technical Support Service at +34 96 321 07 28.
Clean the main brush.
Check if the main brush is installed correctly.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the robot off
and on or do a RESET.
ENGLISH
CONGA 2299 INERTIAL X-TREME
57