Norwood LumberMax HD38 Instrucciones Originales página 12

If equipped with the mobility package,
replace three of the existing 3/8" x 3/4"
mobile package receiver bolts with the
3/8" x 3 1/2" bolts (item #5) and the
flanged nuts (item #3) on the bed frame.
If not equipped with the mobility package
option, install the 3/8" x 3 1/2" bolts (item
#5) and flanged nuts (item #3) on the
bed frame.
Note: A gap of 1 3/8" (3.5 cm) should be
left between the nuts (the gap might have
to be adjusted later on).
Install the valve bracket assembly onto
the previously installed 3/8" x 3 1/2" bolts
(item #5) using 3/8" nylon lock nut (item
#4). Adjust the back nuts so the valve
bracket doesn't touch the front of the
bed frame and so that the valves seat
vertically.
EN–8