Publicidad
Idiomas disponibles
Idiomas disponibles
•
Turn machine off if it jams. Blade jams when it digs too
deeply into workpiece. (Motor force keeps it stuck in
the work.)
•
Always keep drive, cutterhead and blade guards in place
and in proper operating condition.
•
Feed work into blade against direction of rotation.
CAUTION:
Think safety! Safety is a combination
of operator
common sense and alertness at all times when tool is
being used.
WARNING:
Do not attempt to operate tool until it is
completely assembled according to the instructions.
Refer to Figure 1.
Check for shipping damage. If damage has occurred, a
claim must be filed with carrier. Check for completeness.
Immediately report missing parts to dealer.
The planer comes assembled as one unit. Additional parts
which need to be fastened to planer should be located and
accounted for before assembling.
A. Handle Assembly with Bolt and Plug
B. Dust Chute with Screw
C. Half Bag Dust Collection Set
A
\
B
\
Figure 1 - Unpacking Planer
C
WARNING:
Do not attempt assembly if parts are missing.
Use this manual to order replacement parts.
INSTALL
BATTERIES
*
Loosen and remove four socket head pan screws and
then remove the display panel cover (see Figure 2).
*
Insert four (4) C batteries (not included). Make sure to
install the batteries using the correct polarity (i.e., the "+"
symbol on the battery aligns with the "+" symbol on the
battery holder).
*
Replace the cover and secure in position with the four
socket head pan screws.
Figure 2 - Remove Display Panel
Figure 3 - Install Batteries
INSTALL
HANDLE
Refer to Figure 4.
°
Handle with knob is installed on the top right of the planer.
°
Insert handle with knob onto elevation screw top.
°
Secure handle with socket head bolt using wrench provided.
°
Insert plug into handle to cover bolt.
I
Figure 4 - Installing Handle
Publicidad
