Greencut GD750X-3S Serie Manual De Instrucciones página 59

TECHNICAL DATA
Engine Type
Cylinder capacity
Power
Fuel tank capacity
Type of fuel
Oil type
Petrol to oil ratio
Ignition system
Guaranteed sound power level
Auger
Auger Extension
Weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.
BOX CONTENTS
1. Engine
2. Gearbox
3. Handles (x2)
4. Drill bits (depending on model)
5. Drill tip
6. Prolonger
7. Screw and tool bag
8. Mixing pot
9. Instruction manual
• Remove the product and accessories from the box carefully. Make sure all the items listed above are present.
• Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
• Do not discard the packaging material until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
GD750X
OHV 2 stroke engine
75cc
5,2cv / 10.000rpm
1L
Unleaded 95
10W30, 10W40, 15W30 y 15W40
25:1
EASY-START
110dB(A)
Diameter (according to table) x 800mm (length)
600mm (long)
23,57Kg
59
EN