PNI WK400 Manual De Usuario página 14

Technical specifications
Rated speed
Power supply
Dimensions
Weight
Charging the batteries
The kit includes 4 18V 5.0Ah batteries and two office chargers.
Battery charging:
1. Install the battery in the charging base.
2. Power the charging base to a 230V power source.
3. The red LED will light up and will remain lit for the duration of the battery
charging.
4. When the battery is fully charged, the LED will turn green.
The LEDs:
Charger connected to the power
source
Battery charging
Battery charged 100%
Abnormal state of the battery
Battery temperature below 0°C and
above 45°C
User manual
0 - 1350rpm
Li-Ion battery 18V 5.0Ah
200 x 80 x 195 mm
877 gr
Green LED on
Red LED on
Green LED on
The red and green LEDs are blinking
The red LED blinks
14