Logitech ZONE WIRELESS 2 Guía De Preparación página 11

ON-HEAD DETECTION
Sensors on the headset can detect if the headset is
worn or not and control the status It can be disabled or
enabled on Logi Tune app
Note: Functionality depends on the type of application
Auto pause/resume
During media streaming, when the headset is taken
off, the media will pause When the headset is put on,
the media will resume
Answer incoming call
When there is an incoming call, put on the headset to
answer the call To use this feature, enable it on Logi
Tune app
Mic mute/unmute
During an ongoing call, when the headset is taken off,
the mic will be muted When the headset is put on, the
mic will be unmuted To use this feature, enable it on
Logi Tune app
AUDIO OVER USB (DENSITY-FRIENDLY)
If your audio is unstable during a call because there are
too many wireless devices nearby (high density), the
headset can be used as a corded headset
1 Turn off the headset
2 Connect the headset to the USB cable provided
And plug the other side of the USB-C cable into the
USB-C port on your computer
3. Make sure "Zone Wireless 2" is selected on the audio
device setting.
Note: Headset would be charged during this mode
Button controls may not be available in this mode
LOGI TUNE
Logi Tune helps boost your headset performance with
periodic software and firmware updates Learn more
and download Logi Tune at logitech com/tune, the
Apple App Store or Google Play store.
USB-C USB-C
Logi Tune
logitech.com/tune
11 English