Tennant IPC Kosmic-H Manual De Instrucciones página 22

DESCRIPTION OF SYMBOLS
20
DO NOT DIRECT THE JET
AGAINST PEOPLE, ANI-
MALS, POWER SOCKETS
OR THE MACHINE
SELF.
ATTENTION: RISK
BURNS.
ATTENTION: RISK
ELECTRIC SHOCK.
EARTH
WATER INPUT.
WATER OUTPUT.
SWITCHING OF
PUMP MOTOR.
LIGHTING THE BURNER.
FUEL (DIESEL).
CHEMICHALS
(DETERGENT).
DO NOT FEED
DRINKING WATER.
USE AN EN 12729 TYPE
BA SYSTEM SEPARATOR.
GENERAL SAFETY RULES FOR
THE USE OF HIGH PRESSURE
IT
Warning
- The electric connection must be
performed by qualified technicians who
OF
are able to work in observance of the
governing rules (in compliance with the
provisions of the IEC 60364-1 standard)
and of the manufacturer's instructions.
OF
A wrong electric connection may cause
damage to persons, animals or things,
and the manufacturer
considered responsible for these.
- The H.P. cleaners with power lower
than 3 kW are equipped with a plug for
connection to the electric supply.
In this case please check if the electric
power system and the electric sockets
are compatible with the max. power of
the appliance indicated on the plate.
(kW). In case of doubt, please apply to
qualified personnel.
If the socket and the plug of the
machine are not compatible, have the
plug replaced with a suitable type by
THE
qualified personnel.
- Before connecting the machine make
sure that the data indicated on the
plate correspond to those of the electric
supply.
- Do not use extensions to power the
high pressure washer.
If you use an extension, the plug and
socket must be watertight. Unsuitable
extensions may be dangerous.
WITH
EN - english
CLEANERS
cannot be