Tennant IPC Kosmic-H Manual De Instrucciones página 28

FILLING THE FUEL TANK
Fill the tank with fuel for Diesel motors (fig. 5).
Warning
Do not use different fuel from that indicated on the
identification plate.
Check the fuel level from time to time while the cle-
aner is operating.
Attempting to use the cleaner without fuel may cause
damage to the fuel pump.
FIG. 5
FILLING THE DETERGENT TANK
Warning
From the range of recommended products, choose
the one most suited to the washing job to be done
(fig. 6) and dilute it with water according to the in-
structions on the pack.
Fill the detergent tank with the diluted product (fig.
7).
Ask your dealer for the catalogue of the detergents
that can be used depending on the type of washing
job to be done and the type of surface to be treated.
After using a detergent, the detergent intake circuit
must be flushed out with clean water.
FIG. 6
26
FIG. 7
FIG. 8
TRANSPORTING
To move the machine, disconnect it from the mains
electricity and water supplies, release the parking
brake on the side of the machine and push it by the
handle (fig. 8).
COMMAND AND CONTROL DEVICES
Warning
Before connecting the machine to the water supply
and to the power mains, it is essential to know the
function of the cleaner's command and control de-
vices.
SAFETY DEVICES
The safety devices protect the user and the applian-
ce. They must not be tampered with or used for other
than their designated purpose.
Safety valve: protects the high pressure hydraulic
circuit in the event of a by-pass valve malfunction or
if the hydraulic circuit is blocked.
The safety valve is calibrated by the Manufacturer
and sealed. Operations involving the safety valve
must be performed by a technical service centre
only.
Safety device on lance handgrip: Prevents the trig-
ger on the handgrip from being operated acciden-
tally.
Thermal cutout: stops the high pressure washer if
EN - english