Zanussi ZRDN18ES1 Manual De Instrucciones página 10

4.5 FastCool function
If you need to insert in the fridge
compartment a large amount of warm food,
for example after doing the grocery shopping,
we suggest activating the FastCool function
to chill the products more rapidly and to avoid
warming the other food which is already in
the refrigerator.
1. Press the Mode until the corresponding
icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator is shown. When the
FastCool function is on, the fan may work
automatically.
This function stops automatically after
approximately 6 hours.
You can deactivate the FastCool function
before its automatic end by repeating the
procedure or by selecting a different fridge
set temperature.
4.6 Holiday mode
This mode allows you to keep the appliance
empty during a long holiday period reducing
the formation of bad odours.
1. Press the Mode until the corresponding
icon appears.
The Holiday indicator flashes. The
temperature indicator shows the set
temperature.
2. Press the OK to confirm.
The Holiday indicator is shown.
This mode switches off after selecting a
different temperature.
4.7 DYNAMICAIR function
The refrigerator compartment is equipped
with a device that allows rapid cooling of food
and keeps more uniform temperature in the
compartment.
This device activates automatically when
needed or manually.
To switch on the function:
1. Press the Mode button until the
corresponding icon appears.
The DYNAMICAIR indicator flashes.
10 ENGLISH
2. Press the OK button to confirm.
The DYNAMICAIR indicator is shown.
To switch off the function repeat the
procedure until the DYNAMICAIR indicator
turns off.
If the function is activated automatically
the DYNAMICAIR indicator is not shown
(refer to "DYNAMICAIR" section in "Daily
use").
The activation of the DYNAMICAIR
function increase the energy
consumption.
The fan operates only when the door is
closed.
4.8 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat
the procedure until the ChildLock indicator
turns off.
4.9 DrinksChill function
The DrinksChill function is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires to
cool down food products for a certain period
of time.
1. Press Mode until the corresponding icon
appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes)
for a few seconds.
2. Press the Timer regulator to change the
Timer set value from 1 to 90 minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min"
indicator flashes and an audible alarm
sounds. Press OK to switch off the sound and
terminate the function.