Publicidad
Idiomas disponibles
Idiomas disponibles
Before use
Installation & location
1. Ventilation conditions
The location you select for the installation of the appliance should be well ventilated. Do not locate
the appliance near a heat source such as cookers, boilers, and avoid direct sunlight, thus ensuring the
cooling effect and saving on energy consumption. Do not place it in a damp place, thus preventing it
from rusting. The result of dividing the total space of the room in which the The result of dividing the total
space of the room in which the appliance is installed by the amount of refrigerant charge of the
appliance should not be less than 8gr/m
Note: The amount of refrigerant required for the appliance is given on the nameplate, which is attached
to the inside or outside of the product.
2. Recommended space needed for heat dissipation
When the appliance is operating, heat is emitted all around the appliance. Therefore, there must be at
least 30 mm of free space at the top, more than 100 mm on both sides and more than 50 mm at the
back of the appliance.
Front view
A
B
B
3. Ground level
Place the appliance on a firm, flat floor to keep it stable, otherwise it will cause vibration and noise. When
the appliance is placed on materials such as carpets, mats, PVC... The legs of the appliance should be
placed on solid plates.
Recommendations for use
1. Resting time
Once the appliance is properly installed and cleaned, do not switch it on immediately. It can be switched
on after more than 1 hour of rest to ensure normal operation.
2. Testing and cleaning
Confirm that all fittings inside the unit are correctly installed and wipe the interior with a soft cloth.
3. Switching on
Connect the plug to the power socket to switch on the compressor. After 1 hour, open the freezer door (if
available), if the temperature inside the freezer compartment drops considerably, it indicates that the
refrigeration system is working normally.
4. Food storage
Once the appliance is turned on, the internal temperature will be automatically controlled according to
the user's temperature setting. Once it has cooled down completely, place the food, which usually needs
2 to 3 hours to cool down completely. In summer, when the temperature is high, it takes more than 4
hours for the food to cool down completely (try to open the appliance door as little as possible, to avoid
the inside temperature to rise considerably).
.
3
Top view
C
ATTENTION! If there are vibrations due to the appliance being in contact with
the wall, move the appliance away from the wall. The installation may cause
interference to surrounding telephones, radios, televisions, so try to keep the
appliance as far away as possible in such a case.
Required space in mm
A: 30mm
B: 50mm
C: 100mm
ATTENTION! Unobstructed ventilation must be
maintained around the appliance or in a built-in
structure.
21
English
infiniton.es
Publicidad
