Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Functions
Before use
1.Clean the appliance with warm water and detergent, and dry it with a cloth.
Note: The electrical components should be cleaned with a dry cloth.
Inner Display
First switch-on
The first time the appliance is used, the cold room will operate at 6°C and the freezer room will operate
at -19°C. The functions for adjusting the temperature are carried out manually.
Setting the temperature in the cold room (2ºC ~ 8ºC).
When the display is on, press the "Fridge Regulate" button repeatedly to adjust the temperature of the
refrigerator. When the button is pressed, the refrigerator is set to run in cycles "2"-"4"-"6"-"8"-"Power
Cool"-"2". Once the appropriate temperature has been selected, release the button and wait for 3 se-
conds, the set temperature will stop flashing and will be set to "2"-"4"-"6"-"8"-"Power Cool"-"2"..
Setting the temperature in the cold room (2ºC ~ 8ºC).
When the display is on, press the "Freezer Regulate" button repeatedly to adjust the freezer tempe-
rature. When the button is pressed, the freezer is set to run in cycles "-15"-"-"-17"-"-19"-"-24"-"Power
Freeze"-"-15". Once the appropriate temperature has been selected, release the button and wait for 3
seconds, the set temperature will stop flashing and will be confirmed..
Power Cool
Press the "Fridge Regulate" button repeatedly until the "Power Cool" icon flashes, release the button and
wait for 3 seconds, and the Power Cool function will be activated. This function is automatically deacti-
vated after 2 hours. When the refrigerator temperature is set to the "Power Cool" status, it is automatica-
lly deactivated. If the refrigerator doors are opened for more than 3 minutes in the "Power Cool" state, the
"Power Cool" function is automatically deactivated.
Power Freeze
Press the "Freezer Regulate" button repeatedly until the "Power Freeze" icon flashes, release the button
and wait for 3 seconds, and the Power Freeze function will be activated. This function is automatically
deactivated after 4 hours. When the freezer temperature is set to the "Power Freeze" state, it is automati-
cally deactivated..
Display lock
If no operation is performed for 30 seconds, the display lock function is activated and the display swit-
ches off automatically. In this mode, you can deactivate this function by pressing any button.
29
English
infiniton.es
Publicidad
