Publicidad
Idiomas disponibles
Idiomas disponibles
ONE YEAR FULL WARRANTY
ONCRAFTSMAN
TOOL
IfthisCraftsman tootfails togive complete satisfaction within oneyear f rom dateof
3urchase, RETURN ITTOTHE NEAREST SEARS S TORE I NTHE UNITED S TATES,
andSears w ilt r eplace i t,free ofcharge.
IfthisCraftsman tootisused forcommercial orrental purposes, thiswarranty applies
foronly 90days from thedate ofpurchase.
This warranty gives youspecific l egal rights, and youmay alsohave other r ights which
vary from state tostate.
SEARS, ROEBUCK AND CO., D EPT. 817WA, HOFFMAN ESTATES,
IL60179
A
AI_WARNING:
Read and understand all
instructions.
Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious personal
injury.
SAVE THESE
INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in
explosive
atmospheres,
such as in the
presence of flammable
liquids,
gases,
or dust. Power tools create sparks which
may ignite the dust or fumes.
• Keep bystanders,
children,
and
visitors
away while operating
a power
tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Double insulated tools are equipped
with a polarized
plug (one blade is
wider than the other.) This plug will fit
in a polarized
outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified
electrician
to install
a polarized
outlet. Do not change the
plug in any way. Double insulation []
eliminates the need for the three
wire grounded power cord and grounded
power supply system.
• Avoid body contact with grounded
surfaces
such as pipes, radiators,
ranges and refrigerators.
There is an
increased risk of electric shock if your
body is grounded.
• Don't expose power tools to rain or
wet conditions.
Water entering a power
toot will increase the risk of electric shock.
• Do not abuse the cord. Never use the
cord to carry the tools or pull the plug
from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
Damaged cords increase the risk of
electric shock.
• When operating
a power tool outside,
use an outdoor
extension
cord marked
"W-A" or "W." These cords are rated for
outdoor use and reduce the risk of
electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing
and use common
sense when
operating
a power tool. Do not use tool
while tired or under the influence
of
drugs, alcohol,
or medication.
A
moment of inattention while operating
power tools may result in serious personal
injury.
• Dress properly.
Do not wear loose
clothing
or jewelry. Contain
long hair.
Keep your hair, clothing,
and gloves
away from moving parts. Loose
clothing, jewelry, or long hair can be
caught in moving parts. Air vents cover
moving parts and should be avoided.
• Avoid accidental
starting.
Be sure
switch is off before plugging
in.
Carrying tools with your finger on the
switch or plugging in tools that have the
switch on invites accidents.
• Remove adjusting
keys or wrenches
before turning
the tool on. A wrench or
key that is left attached to a rotating part
of the toot may result in personal injury.
• Do not overreach.
Keep proper footing
and balance at all times. Proper footing
and balance enables better control of the
toot in unexpected situations.
• Use safety equipment.
Always wear
eye protection.
Dust mask, non-skid
safety shoes, hard hat, or hearing
Publicidad
