Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE INSTRUCTIONS
! DANGER: no maintenance work of any
isolated the machine from its power source.
Maintenance operations on the electrical circuit
and in any event, all other operations not
explicitly described in this operating manual
must be performed by a TENNANT approved
service technician, in compliance with current
safety regulations and as indicated in the
maintenance manual.
! ATTENTION: before accessing the housing, ensure
to completely empty both the dirty water tank and the
solution tank.
! NOTICE
For machine serviceability, the solution tank is
designed to hinge open with the recovery tank
to access internal components. This two tank lift
procedure must be performed by trained service
personnel only.
! DANGER: after tilting the solution tank, to
prevent it from accidentally closing, insert the
safety bracket into the designated slot.
Maintenance - General rules
Performing
regular
maintenance
Manufacturer's instructions will improve performance and
extend the working life of the machine.
When cleaning the machine, always observe the following
precautions:
Avoid using pressure washers. Water could penetrate the
electrical compartment or motors leading to damage or
short circuits;
Avoid using steam, as the heat could cause the deformation
of plastic parts;
Do not use solvents or hydrocarbon based products.
These can damage the cowling and rubber components.
! ATTENTION: before carrying out the operations
apply the parking brake.
-
Raise the lid of the dirty water tank.
-
the two tabs inwards.
-
Detach the bezel.
EN
according
to
the
28
Publicidad
