brendz Valera Manual De Usuario página 6

Battery icon
Maximum working time: One year
Minimum working time: Four weeks
Maximum working time: Four weeks
Low power:
Note: When the battery is at low voltage (battery voltage ≤2.4V) the timer is forced to close the solenoid
valve. Both manual and automatic functions are cancelled.
Battery placement (Fig. 1)
1. Take out the battery box
2. Insert 2 AA batteries in the battery slot
3. Put the battery slot in the irrigation timer.
WARNING: Make sure the batteries are facing up when inserting the battery slot.
Clock display mode setting (Fig. 2)
To switch between 24-hour and 12-hour mode (The default time setting is a 24-hour mode)
1. Press the ''MAN ''button and rotary knob at the same time and install the battery. The icon as in
Pic.1 or Pic. 2 will be shown.
2. Press the "MAN" button to switch between the 24-hour display mode (Pic.1) and the 12-hour
display mode (Pic.2).
3. Press rotary knob after selecting, the time will be displayed in accordance with the selection
method.
Time and weekday settings (Fig. 3)
1. Twist the rotary knob counterclockwise to enter the parameter setting mode.
2. Press the rotary knob and "hour" will start to flash.
3. Twist the rotary knob to adjust parameter and press the rotary knob to confirm after selecting,
''minute'' will start flashing.
4. Twist the rotary knob to adjust parameter and press the rotary knob to confirm after selecting,
the horizontal line under ''weekday' will start flashing.
5. Twist the rotary knob to adjust parameter and press the rotary knob to confirm after selecting.
6. Press MAN button to exit the setting mode.
Setting the programs (Fig. 4)
Four programs can be set.
A program is a combination of starting time, duration, and day of the week.
1. Select one of the 4 programs you want to set by rotating the rotary knob. ([1] / [2] / [3] / [4] will
start flashing).
2. When the desired program is shown e.g. [1]. Press the rotary knob.
The start time icon (
3. Press the rotary knob to enter the start time setting, and ''hour'' position is flashing; Twist the
rotary knob clockwise or counterclockwise to adjust the parameters.
4. Press the rotary knob to confirm after selecting, the "minute" is flashing; Twist the rotary knob
clockwise or counterclockwise to adjust the parameters.
5. Press the rotary knob to confirm after setting and return to the starting time icon (
state.
6. Twist the rotary knob clockwise to the watering time icon (
7. Press the rotary knob to enter the watering duration time setting, and ''hour'' position is
flashing; Twist the rotary knob clockwise or counterclockwise to adjust the parameters. Note:
The maximum automatic watering time is 6 hours.
8. Press the rotary knob to confirm after setting, the ''minute'' is flashing. Twist the rotary knob
clockwise or counterclockwise to adjust the parameters.
9. Press the rotary knob to confirm after selecting and return to the watering time icon (
flashing state.
10. Twist the rotary knob clockwise to the interval icon (
replace batteries
) is flashing.
) flashing state.
) flashing state.
) flashing
)