brendz Valera Manual De Usuario página 7

11. Press the rotary knob to enter the interval time setting, and ''MO'' is flashing. Twist the rotary
knob between MO~SU to set the days you want to run the selected program. When one of the
days is flashing, press the "MAN" key. A raindrop will appear under the selected days you want
the program to run.
12. Press the rotary knob to confirm after setting and return to the interval icon (
13. Twist the rotary knob clockwise to the ON icon (ON) or OFF icon (OFF) flashing interface, and
then press the rotary knob to confirm. When the program is set on OFF, it is not activated.
14. Repeat for programs [2] – [3] – [4].
15. After setting the desired programming wait for ~ 30 seconds (or press the "MAN" button).
The timer will save the settings and show the next program that is set to start. (Fig. 5)
Automatic operation display (Fig. 6)
The display shows the countdown of the watering time in the automatic watering mode.
Three water droplets are displayed in turn above the watering icon (plant).
To stop the automatic watering before the set time is over, press the "MAN" button. The timer will
return to the set programming.
Manual watering setting (Fig. 7)
1. Press the ''MAN'' button to enter manual setting mode, and ''hour'' position is flashing.
2. Set the desired hours by rotating the rotary knob and pressing the rotary knob to confirm.
3. Set the desired minutes by rotating the rotary knob and pressing the rotary knob to confirm.
Note: The maximum manual watering time is 6 hours.
4. Press the rotary knob to confirm, the timer will start watering.
Manual operation display (Fig. 8)
The display shows the countdown of the watering time in the manual watering setting.
Three water droplets are displayed in turn above the watering icon (plant).
To stop the manual watering before the set time is over, press the "MAN" button. The timer will
return to the set programming.
After all settings are made, connect the timer to the tap.
Troubleshooting:
Display off
Watering is not functional
Water flow is weak
Insert new batteries
Check if:
The faucet is on.
Timer is set to ON
Clock is set correctly
Clean the filter
) flashing state.