Before first use
Check the device and scope of delivery
NOTE!
If opening the packaging with a sharp knife or other pointed
objects, careless handling can damage the device.
- Therefore, be very careful when opening.
1. Take the device out of the packaging.
2. Check that the delivery is complete (see chapter "Scope of delivery").
3. Inspect the device and individual parts for damage. Do not operate a damaged
device; instead, contact the manufacturer via the service center listed on the
warranty card.
1. Remove the packaging material and all protective films.
2. Before using the device for the first time, clean all parts of the device as described
in the chapter "Cleaning".
Set up device
Place the device on a flat and stable surface.
Power supply
1. Connect the power cable 11 to the mains connection 10.
2. Plug the power plug 11 into a properly installed socket.
Switching the device on and off
1. To switch on the device and increase the volume, turn the volume control 2
clockwise.
The power indicator 4 lights up.
2. To switch off the device, turn the volume control 2 counterclockwise until you hear
a "click".
The power indicator 4 goes out.
Set radio station
1. Switch on the device (see "Switching the device on and off").
2. Set the band selector switch 5 to FM or AM.
Risk of damage!
58