Descargar Imprimir esta página

Linsar E-3021C Manual Original página 59

Retrorradio sintonizador am/fm analógico

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3. Align the antenna (see "Aligning the antenna").
4. Turn the frequency selector switch 6 to tune to the desired station.
When the signal is strong, the fine tuning indicator 3 lights up.
If the signal is weak, the fine tuning indicator may not light up even if the radio
signal can still be heard through the loudspeaker.
5. Switch off the device after use.
Align antenna
FM
Extend the telescopic antenna 9 and adjust
its length and angle for optimum reception.
AM
The sensitive directional ferrite antenna
inside the device provides excellent AM
reception in most areas. For best reception,
turn the device in the direction that gives
the best results.
AUX IN function
In AUX IN playback mode, the device will automatically switch off after
approx. 15 minutes if there is no audio input and no action is performed.
1. Connect one AUX cable to the AUX IN connector 8 of the unit and the other end to
the LINE OUT output of a computer or other device.
2. Turn on music playback on your external device.
3. Adjust the volume using the volume control 2.
Headphone function
WARNING!
Using headphones at high volume for a long period of time can
affect or even damage your hearing.
- Reduce the volume to a tolerable level.
Headphones with a 3.5 mm jack plug can be connected to the headphone jack 7.
Health hazard!
59

Publicidad

loading

Productos relacionados para Linsar E-3021C

Este manual también es adecuado para:

Atkr-ecom