HOMCOM AA1-083 Manual Del Propietário página 17

ASSEMBLING SCOOTER
1
Place the T-Bar over the fork
tubeand push the T-Bar down
until it touches the top of the
Headset.
Self-locking fixings may lose their effectiveness.
Failure to properly assemble and tighten all bolts and components may
cause loss of scooter contorl and increase risk of falling. Make certain that
you fully understand all the assembly and maintanence instructions.
BRAKE USE
Make sure that you have a
firm grip on the handlebars
and are traveling in a straight
line. Slide one foot toward the
back of the scooter.
2
Adjust the Front Wheel and
the Clamp so that the Front
Wheel is perpendicular to the
T-Bar.
With the heel of that foot,
GRADUALLY apply pressure
to the top of the brake
mechanism. This will decrease
your speed and eventually
bring you to a stop.
3
Securely tighten all three bolts
Check to be sure that the
T-Bar is securely attached to
the fork tube.