Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION, TROUBLESHOOTING
Preset station tuning
Note
ice
sa
cathene aie
wits
.
.
P
e
e content.
e
swite
wi
e
pre-
(1) Press
the STATION
CALL
switch
e into
which
served reer
days, even if the power cord is ey
the desired station
has been
memorized.
e
If a preset station has been erased, reset it.
e To listen to a Mode
1 broadcast, press the switch once,
and to listen to Mode 2 broadcast, press it twice.
Last station
memory
¢ By pressing the STATION
CALL switch @,
the switch
e
When the POWER switch @ is pressed to turn power on, the
number will be displayed, then the frequency will be
last station received before the power was previously turned
displayed.
off will be received again.
NOTE:
'
@
When
power
is ON,
if the
BAND
selector
switch @is
If, for example, you wish to receive the station memorized
pressed, the last station received before the BAND selector
in STATION CALL switch "13" when listening to the station
switch was previously pressed will be received again.
memorized in switch "9", press switch "1/13" twice.
In this way,
simple and
accurate
reception
of any desired
station is possible.
TROUBLESHOOTING
e Has the power cord been disconnected?
e Reconnect the power cord.
e Have any of the output cords been discon-
| « Connect them properly to the TUNER terminals
nected or incorrectly connected?
e Has the antenna been disconnected or is
the connection loose?
e Has the power cord been unplugged for
several days? (Station memory has been
~
lost.)
els the input selector on the amplifier set to
TUNER
on the amplifier.
e Connect the antenna properly.
Sound distortion
e Are the signals weak and reception poor?
[On the FM band]
e Memorize the preset stations once again.
e Select TUNER as the input source on your
amplifier.
e Substitute an FM outdoor antenna for the FM
T-type antenna.
e Set the FM MONO
switch to ON (reception will
be in monaural).
e Try varying the height and direction of the an-
tenna or use an FM outdoor antenna substitut-
ing a 75-ohm coaxial cable for the standard
cable and fixing it as far away as possible from
the street.
e Static from other appliances (particularly
automobiles) or multipath reflection (radio
waves
beamed
off mountains and tall build-
ings and not received directly.)
e Change the direction of the antenna
until best
reception is obtained as far as possible from
tuner.
¢ Switch off other appliances or keep as far
away as possible from the tuner when
in use.
e Is the AM
loop antenna
oriented poorly or
located in an unsatisfactory position?
Sound distortion
[On the AM
(MW or LW)
band]
¢ Static from other electrical appliances (fluo-
rescent lights/motors?)
e Are the signals weak, with insufficient
e Change to an outdoor FM antenna.
input?
els the FM MONO
switch ON?
Stereo broadcasts
not re-
ceived in stereo.
e Press the FM MONO
switch OFF.
Zz
<ARE1087 >
Publicidad
