Publicidad
Idiomas disponibles
Idiomas disponibles
WHAT'S IN THE BOX
1. Rubber gasket
2. M22 change to M24
3. Rubber gasket with filter
4. M22 connector
5. Main enine of adapter
6. Install M22 connector
7. Remove M24 nozzle
8. Remove M22 nozzle
9. Remove the aerator
10. Cable cargador USB-microUSB
Water output nozzle
The cable is micro-USB to USB
(is included)
NOTE
• Before proceeding with the installation, it is important to ensure
that the product is fully charged.
• It is compatible with both M22 male and M24 female tap nozzles.
This guarantees wide compatibility with different types of faucets,
making it easy to use and adapt to different situations.
Instruction manual
Inlet
Side sensor window
Lower sensor window
micro-USB charging connector
HOW TO INSTALL IT
Faucets with male thread
1
Inner tooth nozzle
Remove
nozzle
M22
Nozzle H22
Faucets with female thread
2
Outer tooth nozzle
Remove
nozzle
H24
Nozzle M24
*Se necessário, o filtro pode ser substituído por uma junta do mesmo diâmetro (mais fina e sem
grelha).
**São fornecidas 2 juntas para esta posição: Com escalão para pôr sobre o adaptador e sem escalão
para pôr na parte superior interna do adaptador.
HOW DOES IT WORK
SIDE SENSOR
With the side sensor, you can enjoy a prolonged water spout that remains
active until you pass your hand over the sensor again. This system
guarantees an efficient use of water, since it stops automatically once
you stop interacting with the sensor. Plus, to further promote savings,
the system automatically shuts off after 3 minutes of continuous use.
ref. 01119
Install gasket,
tighten the joint
M22
Filtro*
H22
Install gasket,
tighten the joint
H24
Rubber gasket**
Nozzle M22/M24
Filtre
H22
The tap must always be
open for the sensor to
work and water to come
out.
ES
PT
EN
FR
Publicidad
