Publicidad
Idiomas disponibles
Idiomas disponibles
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the
socket.
• Use the tools recommended in this manual to obtain
the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
Note!
For your safety in the workplace, fasten the saw to
the floor with screws or bolts to prevent it tipping
or sliding.
7.
Technical data
Motor
Performance input P1
Output power P2
Operation mode
Rated idling revolution
speed
Engine brake
Engine brake type
Dimensions L x W x H
Sawblade
Weight
Wood Ø min. / max.
Lenght if wood min. /
max.
Protection type
Protection class
Subject to technical changes!
*Operating mode S2, short-term operation with con-
stant load.
The mode comprises of a start-up period, a time with
constant load and an idle time. The operating time is
10 mins, the relative duty cycle is 15% of the operating
time
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
28 | GB
230 V / 50 Hz
2,2 kW
1,5 kW
S2 15 min
2800 min
-1
yes
mechanical
1002 x 737 x 1046 mm
405/30/3,2 mm Z32
39 kg
30 - 140 mm
300 - 1000 mm
IP 54
I
www.scheppach.com
Characteristic noise emission values
Sound power level L
WA
Sound pressure level L
pA
Uncertainly K
pA
8. Unpacking
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. In case of complaints the dealer must be
informed immediately. Subsequent complaints will
not be accepted.
• If possible, store the packaging until the warranty
period has expired.
• Read the operating manual to make yourself familiar
with the device prior to using it.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
9.
Attachment / Before starting
the equipment
m IMPORTANT!
You must fully assemble the appliance before us-
ing it for the first time!
9.1 Assembly
9.1.1 Swivel frame (9) (fig. 4 - 8)
Position the (right) guard (18) at the outer side of the
fastening and the saw blade guard 1 (20) at the inner
side of the fastening. Fasten the two steel panel parts
with three flat, rounds screws and nuts (A1). Fasten
the guard (18) to the swivel frame with the hex screws
and nuts (A2). (fig. 4 - 5)
Repeat this process to fit the (left) guard (19) and saw
blade guard 2 (21). (fig. 6 - 7)
115 dB(A) (EN ISO 3744)
101 dB(A) (EN ISO 11201)
4 dB(A)
Publicidad
