Whirlpool SMO 658C/BT/IXL Manual Del Usuario página 6

TROUBLESHOOTING
• Check that the electricity supply has not been shut off.
• If you are unable to turn the hob off after using it, disconnect it from the
power supply.
• If alphanumeric codes appear on the display when the hob is switched on,
consult the following table for instructions.
Error code
C81, C82
F02, F04
F01, F06, F12, F13,
F25, F34, F35, F36,
F37, F41, F47, F58, F61,
F76
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation. These noises
actually come from the cookware and are linked to the characteristics of the
pan bottoms (for example, when the bottoms are made from different layers
of material or are irregular).
VERIFIED COOKING
A table below has been created specially to make it possible for inspection
bodies to use our products.
Veri ed cooking
Heat distribution, "Pancakes"
EN 60350-2
test acc. to §7.3
Heat performance, "French fries"
EN 60350-2
test acc. to §7.4
Melting and keep warm, "chocolate"
Simmering, "rice pudding"
ECO-DESIGN: The test was carried out in accordance with regulations, by selecting all of the cooking zones on the hob to form a single area,
or by using the Flexifull function.
Description
The control panel switches o
because of excessively high
temperatures.
The connection voltage is wrong.
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate the
control panel lock function.
Possible causes
The internal temperature of
electronic parts is too high.
The sensor detects a discrepancy
between the appliance voltage
and that of the mains supply.
These noises may vary according to the type of cookware used and to the
amount of food it contains and are not the symptom of something wrong.
Veri ed cooking positions
Cure
Wait for the hob to cool down
before using it again.
Disconnect the hob from the
mains and check the electrical
connection.