Makita CF003G Manual De Instrucciones página 6

PARTS DESCRIPTION
5
切
タイマー
2
Fig.1
1 Air volume control switch
4 Air volume indicator
7 Vertical angle fixing knob
10 13V DC socket
* These parts may be stored in the accessory case when shipped from the factory.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the appli-
ance is switched off and the battery cartridge is
removed before adjusting or checking function on
the appliance.
Installing or removing battery
cartridge
CAUTION:
Always switch off the appliance
before installing or removing of the battery
cartridge.
CAUTION:
Hold the appliance and the bat-
tery cartridge firmly when installing or removing
battery cartridge. Failure to hold the appliance and
the battery cartridge firmly may cause them to slip off
your hands and result in damage to the appliance and
battery cartridge and a personal injury.
7
8
4 6
首振
り
OFF
1 3
2 Auto-off timer button
5 Auto-off timer indicator
8 Accessory case
11 AC adaptor *
10
12
To install the battery cartridge, align the tongue on the battery
cartridge with the groove in the housing and slip it into place.
Insert it all the way until it locks in place with a little click.
To remove the battery cartridge, slide it from the appli-
ance while sliding the button on the front of the cartridge.
Fig.2
► 1. Button 2. Battery cartridge (18V) 3. Battery car-
tridge (36V - 40V max)
6 ENGLISH
9
11 12
3 Oscillation button
6 Oscillation indicator
9 Battery slot
Power source cord *
1
1
3
2