Beurer IH 57 Instrucciones De Uso página 54

• Then clean the masks
• Then dry all parts thoroughly. See the section "Drying" for further details.
Disinfection with boiling water
• The medication container
for 15 minutes in order to disinfect them. Ideally, distilled water should be used for this, to prevent
contamination and limescale forming on the mesh. Contact between the parts and the hot base of
the pan should be avoided.
• Then dry all parts thoroughly. See the section "Drying" for further details.
• The medication container
• We guarantee 50 disinfection cycles with boiling water per medication container.
NOTICE
The masks must not be placed in hot water!
• We recommend disinfecting the masks using 70% – 75% ethyl alcohol.
Drying
• Dry the parts carefully using a soft cloth.
• Gently shake the medication container
from the tiny holes.
• Place the individual parts on a clean, dry and absorbent surface and leave them to dry completely
(at least 4 hours).
NOTICE
Please ensure that the parts are completely dry after cleaning, otherwise the risk of bacterial growth is
increased.
Put the parts together again when they are completely dry and place them in a dry, sealed container.
and the mouthpiece
9 10
, the cover
2 1
must not be placed in the microwave.
2
a few times so that any water in the mesh is removed
2
11
with water.
and the mouthpiece can be placed in boiling water
54