cecotec CERAMICCARE AIRGLAM Manual De Instrucciones página 36

ENGLISH
7. Replace the curler with the one fit for the hair on the opposite side of the head and do the
same.
After use
1. Turn the appliance off and unplug it.
2. Place it on a heat-resistant surface until it cools down.
3. Remove the hair and dust from the appliance and attachments.
4. Make sure there is nothing obstructing the air inlet or outlet.
5. Clean the appliance with a soft cloth and store it in a dry place.
4. CLEANING AND MAINTENANCE
Unplug the appliance from the power supply and allow it to cool down before cleaning.
-
Use a soft, damp cloth to clean the surface of the device.
-
Do not immerse the appliance in water or other liquids.
-
Do not use abrasive cleaners or scouring pads to clean the device.
-
Do not twist, bend, pull, or damage the power cable.
-
Clean the dirt and hairs that may be clogging the device.
-
Cleaning the filter (Fig. 3)
Turn the air-inlet filter cover to unlock it and gently pull it downwards.
-
Use a soft brush or a cotton swab to clean the air inlet and the filter.
-
Refit the cover by turning it to lock it in place.
-
5. TROUBLESHOOTING
Problem
It does not
work properly
36
Possible causes
Check if the appliance is correctly plugged in.
Check if the attachment is correctly fitted.
Check if the appliance switched off due to overheating.
Switch off the appliance, unplug it from the mains, and allow it to cool
down properly.
Before turning it back on, make sure that nothing is clogging the air inlet.